The concrete transit mixers we manufacture have the following specifications:

Drum
Nominal capacity	M3	6
Geometric volume	M3	10
Filling ratio	%	59
Drum speed	PM	0 - 14
Diameter	Mm	2200
Rollers	No	2
Water pump	L/min	375
Water pump pressure	Bar	3
Water meter scale	L	0 - 400
Water tank capacity	L	400
Total weight	Kg	3400

We specialize in designing and manufacturing qualitative array of mobile concrete mixers, hoists and vibrators. Our concrete mixers are widely appreciated by domestic as well as international clients for sustaining every climatic condition and high operation efficiency. Backed by in-house design unit with CAD/CAM facility, entire range is designed to meet market growing requirement and customer's expectation. We provide mobile concrete mixers in various models numbers with following technical specifications:
 

Model	Concrete Mixer 14x10JF-867
Drum	Constructed of rolled steel plate and steel end plates, they are welded together with machined roller path. It is also provided with a central cast iron gear ring, which is fitted in segments.
Strip	Designed to give a steep angle of feed, a shaker is fitted to assist the discharge
Transmission	This mixer is also fitted with encased bushed roller chain with cuts prokets, which directly drives transmission on the drive shaft. In the drum roller assembly each roller is mounted with renewable bearings

 
Following are the features ofconcrete mixers:

Model	Concrete Mixer 10x7JJ-868
Chassis	Made of heavy steel sections, it also contains four M.S. or C.I. Wheels
Power Unit	It contains 1.5H.P. Diesel Engine or 2.5H.P. Electric Motor with Starter
Transmission	For transmission purpose, we make the best use of Gun metal bushes & rollers chains
Mixering Drum	It has the more capacity which allows a guaranteed 15% overload and is provided with specially shaped mixing blades for efficient mixing
Pan Mixer-7/5 CU.FT.JD-912	This is a portable as well as stationary type with standard size 41/2' diameter and capacity 7/5 cu. ft. It is provided with special engine guard, discharge chute and 4 M.S. road wheels
Power Unit	5 H.P.Diesel Engine or 5 H.P.Electric Motor with Starter

Empowered with competent workforce, we offer quality tower hoists which is fabricated of appropriate material and innovative production techniques. Our unique design tower hoists is available in model numbers including:

Tower Hoist JT-1102:

Some of the features which provide competitive edge over the competitors are safety, efficiency and simplicity in operation. Its specifications include:

• Manufactured in two capacities of 500kgs and 1000kgs.gross lead
• Height: Standard 120 feet or 36.6 m
• Winch: Friction Roller type
• Speed: 33 meters per minute but it is to be noted that this unit can also be designed for a higher speed against a specific requirement
• Prime Mover: 11.9H.P.diesal engine and 15H.P. electric motor with starter

Our range of Floor Polisher is robustly constructed for special cast iron body; geared wheels of steel are fully tempered. In this machine, all the organs are hermetically closed into the body frame and with M.S. cover

Specification:

• Capacity: 300 sq.ft. of the surface can be polished in a day

Prime Movers:

• 2H.P.Electric Motor or
• 2H.P.Petrol Engine

Our precision engineered range of Movable Tower Hoist is designed for safety, efficiency and simplicity in operation. These are manufactured in capacities such as 500kgs and 1000kgs.gross lead as per client’s requirements.

 

Specifications

• Height: Standard 120ft.or36.6m
• Speed: 33 metres per min., but can also be designed for a higher speed against a specific requirement
• Winch
• Friction Roller type
• Prime Mover: 1. 11.9H.P.Diesal Engine
• 2. 15H.P. electric motor with starter

We are offering a wide range of Vibrating Table, which is available in various sizes such as 2"x2", 3"x3", 6"x6" as per customers’ requirement. These are catering to the requirements of construction and engineering related industries.

 

Specifications

 

• 2H.P.MK-12/2 Viliers's Petrol Engine or

• 2H.P. electric motor with starter

• 4.4H.P.Lombardini Diesal Engine

We are engaged in manufacturing and exporting of a wide range of Pan (Platform) Vibrator & Shutter Vibrator, which is developed to suit all types of site conditions. These have a high frequency of 17,000vib/min ensuring perfect homogenous compaction of concrete mixture of different grades.

 

Specifications:

 

Size

• Needle: 25mm, 40mm, 60mm diameter

• Flexible shaft: 4m. Or 6m. In length

Our organization is involved in offering an extensive range of Belt-Driven Vibrator & Surface (Screed) Vibrator. These are manufactured in compliance with the international quality standards to ensure high performance at clients. The vibrator is fitted with electric motors and diesel engine for high functionality.

 

Specifications:

 

Sizes:

• Shaft-12ft. or 20ft

• Needle-1Va',and 23/fe'

• Frequency: 8,000-10,000 vib./min.

 

Prime Movers:

 

• 2H.P.MK-12/2 Viliers's Petrol Engine

• 2H.P. electric motor with starter

• 4.4H.P.Lombardini Diesal Engine

We are involved in manufacturing and exporting a wide range of Hand Grinder & Surface (Inclined) Vibrator, as per the demands of our valued clients. These vibrators with any of the prime movers will have a grinder attached to the flexible shaft. This helps to facilitate grinding a 3,000 r.p.m.

Our organization offer a comprehensive range of Pan mixer, 7/5 CU.FT.JD-912, which is portable as well as stationary type. These are available in standard size of 41/2' diameter and capacity 7/5 cu. ft. Further, pan mixer is also provided with special engine guard, tow bar, discharge chute and 4 M.S. road wheels.

Specifications:

 

Power Unit:

• 5 H.P.diesal engine

• 5 H.P.electric motor with starter

We are offering a wide range of Hand Mixer, which is fabricated using high grade raw material procured from reliable vendors. These are appreciated for sturdy and easy running and can be hand operated and motor or petrol driven. Our range is a barrow tipping type having an capacity of 100 liters for half bag of cement.

We are engaged in manufacturing and designing an extensive range of Concrete Vibrator (JSDMK7/54, JT-MK 7/101,JG-MK 7/255) to suit all types of site conditions. These vibrators have high of frequency of 17,000vib/minensures, which is perfect homogenous compaction of concrete mixture of different grades.

 

Specifications:

 

Size	Needle: 25mm,40mm, 60mm diameter Flexible shaft: 4m. or 6m. in length
Vibrating Needle:	Consists of specially treated steel components Works on the principle of friction A pendulam type rotor arrangement is provided
Prime Mover	JSD-MK 7/54: 1.2 H.P.MK-12/2Viler's Petrol Engine JG-MK 7/255 :2.2H.P. electric motor with starter. JT-MK 7/101 : 3.4.4H.P.Lombardini Diesal Engine
Flexible Shaft	An outer hose of reinforcement rubber and a steel inner are of high strength The low speed drive ensures full protection

With the rich industry experience, we are engaged in offering a quality range of Concrete Mixer (10x7JJ-868. These are provided with 1.5H.P. diesel engine or 2.5H.P. electric motor with starter power unit. For better functionality, gun metal bushes & rollers chain are used throughout the operation.

 

Specification

Chassis	Heavy steel sections have been used by durability. Four M.S. or C.I. wheels are provided.
Leading Hopper	Designed in accordance to I.S. Specifications
Power Unit	1.5H.P. diesel engine or 2.5H.P. electric motor with starter
Transmission	Gun metal bushes & rollers chain used throughout
Mixering Drum	Has more capacity which allows a guaranteed 15% overload. Specially shaped mixing blades are provided for efficient mixing. Optional Extras;1.Water tank(revolving type), capacity 35 ltrs.2.Pnematic wheels

 

We are offering a quality range of Concrete mixer (14x10J F-867), which is equipped with drums, strip and water tank. Our range suits the complete requirements of modern construction technology.

 

Specifications:

 

Drum	Constructed of rolled steel plate and steel end plates welded together with machined roller path. A central cast iron gear ring is fitted in segments. Special abrasive resisting blades are provided for perfect mix.
Strip	The fully automatic loader is designed to give a steep angle of feed. A shaker is fitted to assist the discharge.
Water tank	Self measuring type is fitted on the frame of the mixer.
Transmission	Suitably encased bushed roller chain with machine cutsprokets driving directly on the drive shaft. In the drum roller assembly each roler is mounted with renewable bearings.
Chassis	Strong all steel welded constructions with swivelling front axle provided with four iron wheels. Luberication is by means of grease ripples.

 

Note:

All moving parts are enclosed affording complete protection to operator and immunity from weather.